Description

Protective and heat-resistant Clear Coat spray paint

MoTip Heat Resistant Clear Coat is a spray paint that effectively protects treated and untreated parts that are exposed to extremely high temperatures, such as an Exhausts or Engine Blocks. The heat-resistant paint is also resistant to wind and weather as well as gasoline and chemicals. MoTip Heat Resistant Clear Coat can withstand temperatures up to 800 degrees and has a completely clear color, so it can be used on all parts regardless of color.

Perfect for Exhausts, stoves and grills

If you want to protect your Exhausts or age parts that are exposed to high heat, MoTip Heat Resistant Clear Coat is an obvious choice for you. You’ll find that your Exhausts will have a well-maintained and durable appearance.

Remember to shake thoroughly first

If the part you want to treat is mounted on a scooter or similar, it is important that you remove the part before spraying it with Clear Coat. Shake the heat-resistant MoTip paint thoroughly and spray a thin, even coat on a clean and completely dry surface from a distance of approximately 25-30 cm. Repeat as needed, always shaking the can between coats. Allow the Paint to dry for 1 hour at room temperature and then heat the part for 30-60 minutes at 160°C to fully cure the paint. Smoke will be produced during solidification. Always clean the Jets when you’re done to make sure it doesn’t clog. This is easily done by turning the can upside down and then holding the Jets for about 5 seconds.